Sort 1   Sort 2    
  • Product

    Alloy Steel Profiles - S5 Cold Work Tool Steel Plates  (Cold Rolled, Yield 1MPa) - FOB China

  • Requirement:
  • Short Description: S5 Cold Work Tool Steel Plates Bars Sheet Forgings
    Preheating: Heat at a rate not exceeding 400°F per hour (222°C per hour). For complex and large tools, heat to 1150-1250°F (621-677°C) and equalize. Then heat to 1300-1400°F (704-760°C) and equalize. For simple geometries, use only the second preheating temperature range.
  • Detailed Description:

    S5 Cold Work Tool Steel Plates Bars Sheet Forgings
    Preheating: Heat at a rate not exceeding 400°F per hour (222°C per hour). For complex and large tools, heat to 1150-1250°F (621-677°C) and equalize. Then heat to 1300-1400°F (704-760°C) and equalize. For simple geometries, use only the second preheating temperature range.
    S5 Shock-Resisting Tool Steel is a silicon-manganese tool steel which exhibits the highest impact toughness among all of the "S" type steels. The high toughness and the ability to be hardened to 62 Rockwell C make S5 an excellent choice for applications that require higher strength than S7 shock-resisting tool steel. The steel is typically hardened using an oil quench, but for simple geometries, the steel may be water quenched.
    https://www.risunsteel.com/cold-work-tool-steel/
    APPLICATIONS: Pneumatic tools, shear blades, mandrels, heavy-duty punches, and stamping dies.
    COMPOSITION
    C Mn Si Cr Mo V
    0.60 0.90 1.90 0.18 0.35 0.28
    PHYSICAL PROPERTIES
    Density: 0.280 lb/in3 (7750 kg/m3)
    Specific Gravity: 7.75
    Modulus of Elasticity: 30 x 106 psi (207GPa)
    Machinability: 65-70% of a 1% carbon steel
    HARDENING
    Critical Temperature:Ac1: 1410°F (766°C)
    Preheating: Heat at a rate not exceeding 400°F per hour (222°C per hour). For complex and large tools, heat to 1150-1250°F (621-677°C) and equalize. Then heat to 1300-1400°F (704-760°C) and equalize. For simple geometries, use only the second preheating temperature range.
    Austenitizing (High Heat): Heat slowly from the preheat. For Oil Quenching: 1600 - 1700°F (871 - 927°C) For Water Quenching: 1550 - 1650°F (842 - 899°C) Soak for 30 minutes for the first inch (25.4 mm) of thickness, plus 15 minutes for each additional inch (25.4 mm) of thickness.
    Quenching: Oil or water to 150-125°F (66-51°C).
    Tempering: Temper immediately after quenching. Hold at temperature for 1 hour per inch (25.4 mm) of thickness, 2 hours minimum, then air cool to ambient temperature. To minimize internal stresses in cross sections greater than 6 inches (152.4 mm) and to improve stability in tools that will be EDM’d after heat treatment, a soaking time of 4 to 6 hours at the tempering temperature is strongly recommended.
    Cryogenic Treatment: Some prefer to do cryogenic treatment as an extension of the quench from the austenitizing treatment. Others prefer to cryogenically treat after tempering.
    S5 tool steel suppliers:Hubei Risunsteel Co., Ltd.
    ANNEALING
    Annealing must be performed after hot working and before re-hardening.
    Heat at a rate not exceeding 400°F per hour (222°C per hour) to 1425 - 1475°F (773 - 801°C), and hold at temperature for 1 hour per inch (25.4mm) of maximum thickness; 2 hours minimum. Then cool slowly with the furnace at a rate not exceeding 50°F per hour (28°C per hour) to 1000°F (538°C). Continue cooling to ambient temperature in the furnace or in air. The resultant hardness should be a maximum of 229 HBW. More information click here.
    Risunsteel,based on the over one hundred years’s production history of special steel in Huangshi, provide professional services and material for cutting tool companies, mould companies and other industrial enterprises all over the world for years.

  • Detail of Company who is publishing this product information

    No Company Name Country State/Region Company Picture Current Stock Lists Company Introduction
    1 Hubei Risunsteel Co. Ltd
    China.htmlChina Hubei Risunsteel, based on the over one hundred years's production history of special steel in Huangshi, provide professional services and material for cutting tool companies, mould companies and other industrial enterprises all over the world for years.
    Type of Business:

    Product List:

    Number of Employees in the Company:

    Annual Sales Value:

    Phone:
    +8613339903897

    Company Email:

    Company Web Site:

    Total: 1 record     Go Companies »
  • User who is publishing this product information

    No User Full Name Company Verified Manufacturer Position Phone Email Country Registration Date on Steelads.com
    1 Mr. Margaret Yu Hubei_Risunsteel_Co_Ltd.htmlHubei Risunsteel Co. Ltd Sales Manager +8613339903897 - Login to Steelads - China.htmlChina 10 Oct 2020
    About You:
    Risunsteel, based on the over one hundred years's production history of special steel in Huangshi, provide professional services and material for cutting tool companies, mould companies and other industrial enterprises all over the world for years.

    Total: 1 record     Go List of Employees - Metal Companies »
      • Country Details

        No Country Name Capital Region Surface Area Population
        1 China Beijing Eastern Asia 9,572,900 km² 1,277,558,000 people
        2 USA Washington North America 9,363,520 km² 278,357,000 people
        Total: 2 records     Go Countries »




      About Us Companies Latest Products Browse Product Pictures Old Steelads Website TOP25 World Steel Companies

      Copyright © 2004-2015 B2B Metal & Steel Products Steelads.com, Gcoupon.com. All rights reserved.

      My IP Address powered by Myip.ms Facebook bot last visit time powered by Myip.ms
      World No.1 Global Classified Metal & Mineral Products Database